12×10 Garden Shed Plans

A complete step-by-step DIY guide on how to build a 12' x 10' garden shed. Plans include materials and cut list, 2D plans and elevations, 3D views from all angles, measurements, and assembly instructions. The following 12x10 garden shed plan is intended for all builder levels from beginners to experts.

12x10 garden shed DIY plans

Get the complete 12×10 Garden Shed plans – PDF Instant Download:
PDF includes the cut list, additional diagrams and dimensions, complete step-by-step DIY instructions.

Buy Complete PDF Plan

 

12×10 Garden Shed Plans | Free DIY Woodworking Guide

 

Material and Cut List

FLOOR
9 – 2×6 Pressure Treated Lumber: 11′-9″
2 – 2×6 Pressure Treated Lumber: 10′
4 – 4×4 Pressure Treated Lumber: 10′
4 – 23/32″ Tongue and Groove Plywood 4′ x 8′ Sheet (cut to size)

WALLS
46 – 2×4 Lumber: 7′-4 1/2″
2 – 2×4 Lumber: 9′-5 ”
4 – 2×4 Lumber: 10′
2 – 2×4 Lumber: 12′
4 – 2×4 Lumber: 11′-5″

SIDINGS
12 – 4′ x 8′ Plywood Siding Panel T1-11 (380SF)

TRUSS
14 – 2×4 Lumber: 6′-6 1/4″
7 – 2×4 Lumber: 10′
7 – 2×4 Lumber: 2′-2 1/2″
4 – 2×4 Lumber: 2′-6 3/8″
Metal Gusset (reference detail for sizing)

PURLIN & ROOF
10 – 2×4 Lumber: 13′-8″
7 – 4′ x 8′ 1/2″ Plywood Sheet (205SF)
Roof Underlayment (205SF)
3-Tab Roof Shingles (205SF)

ROOF TRIM
4 – 1×6 Lumber: 6′-8 1/8″
2 – 1×6 Lumber: 13′-8″
4 – 1/2″ Plywood: 10 3/8″ x 6-5 3/8″
2 – 1/2″ Plywood: 12′- 3/4″

TRIM
8 – 1×4 Lumber: 7′-9 5/8″

HARDWARE
3 1/2″ Galvanized Steel Nails
2″ Deck Screws
2″ Galvanized Finishing Nails
1 1/2″ Drilling Roofing Screws

DOUBLE DOOR FRAME
2 – 2×4 Lumber: 6′-3 1/2″
6 – 2×4 Lumber: 7 1/2″
2 – 2×6 Lumber: 6′-3″ (door header)
1 – 2×6 Plywood Filler: 6′-3″ (door header)
1 – 2×6 Lumber: 6′-7″ (door trim)
2 – 2×4 Lumber: 6′-5″ (door trim)

DOUBLE DOOR
4 – 2×6 Lumber: 3′
2 – 2×6 Lumber: 2′ 5″
4 – 2×4 Lumber: 5′ 6″
2 – 4′ x 8′ Plywood Siding Panel T1-11: 6′-5 3/4″ x 3′-0″
2 – Door Handle or Latch
6 – 3 1/2 in. x 5/8 in. Door Hinge

WINDOW (optional)
4 – 2×4 Lumber: 7′-4 1/2″
2 – 2×6 Lumber: 3′-2 3/8″ (header)
2 – 2×4 Lumber: 3′-2 3/8″
2 – 2×6 Lumber: 3′-6 3/8″ (window trim)
2 – 2×4 Lumber: 2′-11 1/4″ (window trim)
1 – 35 3/8″ x 35 3/8″ Single Hung Vinyl Window

 

Step 1 – Foundation and Floor

Start with selecting a proper site for the shed foundation, ideally a flat solid surface away from any large trees.

The first step is cut nine 2×6 lumbers to 11′-9″ length, and two 2×6 lumbers to 10’0″. Next, place the four 10′ 4×4 lumbers parallel to each other at 48″ apart. Then, assemble the four 2×6 perimeter frame on top, this will outline the overall floor frame. Drill pilot holes through the joists and secure with 3 1/2″ screws. Finally, install the seven 2×6 floor joists at 16″ O.C., and 12″ O.C. near the sides.

12x10 garden shed floor frame plan

3d shed floor frame 12x10

 

After the floor frame is secured, cut the tongue and groove 23/32″ plywood to size and attach to the frame. You’ll need about 4 full sheets to cover the 120SF floor area. These sheets usually come in standard sizes of 48″ x 96″. Insert 2″ deck screws every 8″ along the joint, don’t leave any gaps between the sheets. Refer to the cut pattern and dimensions illustrated below:

shed floor panel layout dimensions

Step 2 – Walls

Start with the front wall frame first, all frames used here are 2×4’s (except the door and window header which are 2×6’s).

Cut two 2×4 to 10′ in length, these will be used for the top and bottom plates. Then, cut eight 2×4 to 7′-4 1/2″ for wall studs, these will be placed 16″ O.C. You’ll also need to cut out a 9′-5″ 2×4 for the double top plate. Drill pilot holes through the plates and insert the 3 1/2″ screws into the studs to secure in place. Align the frame edges and make sure all corners are flush for a professional result.

See detailed Door and Window framing instructions here:

Shed Double Door Plan

Shed Single Door Plan

Shed Window Plan

 

The 2×4 studs holding up the door header need to be cut at 6′-3 1/2″.

shed front wall frame elevation

To construct the door header, cut two 2×6 lumber to 6′-3″ length, and insert 1/2″ plywood as filler. Use wood glue and 3 1/2″ nails to secure all the pieces together.

double door header dimensions

Align the finished front wall frame with the front edge of the floor foundation:

wall frame 3d shed

Next up is the building the shed’s back wall. Cut two 2×4’s to 10′ length, and 11 more  2×4’s to 7′-4 1/2″ length. Then cut out a 9′-5″ 2×4 as the double top plate. Follow the framing plan below.

Space the wall studs to 16″ O.C., identical to the front wall. Drill pilot holes through the plate and insert 3 1/2″ screws to secure the studs.

back shed wall frame plan

Continue the build by assembling the 2 side wall frames. Cut two 2×4’s lumber to 11′-5″ as top and bottom plate, then a full 12′ 2×4 as the double top plate. then cut 13 2×4’s to 7′-4 1/2″ for the wall studs.

The east side wall is built with twelve 2×4 wall studs at 7′-4 1/2″ length, spaced 16″ apart on center. The top and bottom plates are 11′-5″ 2×4’s, with the double top plate at 12′-0″. Drill pilot holes through the plate and insert 3 1/2″ screws to secure the studs.

east shed wall frame

Now it’s time to secure all four wall frames together for your 12×10 garden shed. First, line up the edges of the front and side wall frame with the floor frame perimeter. Make sure edges line up and there’s no gaps, use a spirit level if needed. Then, drill pilot holes through the bottom wall plate, and insert 3 1/2″ screws to secure wall frame to the floor. After both wall frames are secured, lock the adjacent walls together by inserting 3 1/2″ screws or nails.

Repeat and assemble all 4 wall frames.

wall frame assembly instruction

Step 3 – Roof & Truss

The roof will require a total of 7 identical kingpost style trusses, installed 24″ O.C. There are also two cross bracing placed on both ends for added stability. The trusses are designed to have an overhang of 10″ on both sides.

shed roof truss 3d

Refer to the truss details below for dimensions and assembly instructions.

Tip: make 1 truss first and make sure everything fits in place.


shed roof truss construction truss plan

After you’ve finished assembling the trusses, place them 24″ O.C. on top of the wall frames. Then use 3 1/2″ nails to secure each rafter from the underside of the plate. Attach the two set of cross bracing at midpoint of the end truss bays.

12x10 shed truss layout

The next step is to add purlins on top of the trusses. Measure and cut out 10 2×4 lumbers to approximately 13′-8″ in length. Center the purlins to leave about 10″ of overhang, secure to the trusses with 3 1/2″ nails.

After all the purlins are secured in place, measure and cut the 1/2″ plywood panels to size. These sheets usually come in standard 96″ x 48″ size, you’ll need about 180SF to cover the entire roof area. Insert 2 1/2″ nails into the purlins at about every 10″ to lock the plywood sheets in place.

 

Next up is installing the exterior shed sidings, it’s easier to do this first before adding in the roof trims.

Measure and cut 12 T1-11 plywood siding panels to size. These shed panels are designed to interlock, so plan them out accordingly. These siding panels also come in standard sizes of 96″ x 48″, you’ll need about 380SF to cover the entire shed.

The front double door opening is 6′-3 1/2″ x 6′. For the side wall siding, measure and cut out the door and window openings before installing. The rough door opening is 72″ x 77″, and the optional window opening is 2′-11 1/4″ x 2′-11 3/8″.

Cover the entire roofing area with roof underlayment or tar paper, this is a water-resistant barrier material to keep the wood structures dry. A 12×10 sized shed will require about 180SF to cover the entire roof area.

roof underlayment area

Finally, we need to lay out the roof shingles (180SF of 3-tab roof shingles). Start at the bottom of the roof, measure and mark every increment height all the way to top of the roof. Use glue or glue strip along the rake edge and drip edge. Then, insert 2 1/2″ nails to secure in place.

Tip: You can select the roof shingle material to match the roofing material of the main house, for a unified look! Get samples from your local hardware or home renovation store to get a close match.

12x10 roof shingles

Step 4 – Trims, Door, and Window

For the wall trims, measure and cut eight 1×4 lumbers to 7′-9 3/4″, trim the top angle as needed. Align and secure these trims with 2 1/2″ nails into the wall frames.

As for the door trim: use two 6′-7″ long 2×6 as the header trim, and two 6′-5″ long 2×4’s as frame trims. The window will require a 42 3/8″ 2×6 header, and 35 1/4″ side trims. Secure all trims to the studs with 2 1/2″ nails.

12x10 shed door and window trims

Add in the shed door and optional window. Refer to detailed Door and Window plans here on how to build these:

Shed Double Door Plan

Shed Single Door Plan

Shed Window Plan

 

12x10 shed door and window plans

 

Step 5 – Paint

You’ve completed your very own 12×10 garden shed! Now it’s time to paint the masterpiece.

First, wipe off any dirt or dusts off the T1-11 siding surface and the trims. Prime the siding with a heavy acrylic primer, a single thorough coat will do the job. It’s best to use a small brush to fill in the grooves and corners first, and then use a larger roller to cover up the flat areas. Let it sit and dry. Then apply two coats of exterior grade acrylic paint, allow 2 hours between coats to completely dry.

 

12x10 garden shed construction

 

 

 

Full Version PDF PLANS available in my Etsy shop, with complete plans, materials and cut list, dimensions, and step-by-step instructions.

Share:

Facebook
Twitter
Pinterest

Build Blueprint is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a way for websites to earn advertising revenues by advertising and linking to Amazon.com.

Leave a Comment